Kitchen Measurement Conversion Chart: Cups, Tablespoons, Ounces, and Grams
cooking conversionsbaking basicskitchen measurementsrecipe scalingprintable charts

Kitchen Measurement Conversion Chart: Cups, Tablespoons, Ounces, and Grams

MMasterChef Pro Editorial Team
2026-11-21
7 min read

Convert cups, tablespoons, ounces, milliliters, and grams with ingredient-specific examples and a reliable recipe-scaling checklist.

Use this kitchen measurement conversion chart to move confidently between cups, tablespoons, teaspoons, fluid ounces, milliliters, and grams. You will also find ingredient-specific cups-to-grams examples, a simple recipe-scaling formula, and a practical checklist for converting an entire recipe without losing its balance.

Overview

Recipe measurements usually fall into two systems: volume and weight. Cups, tablespoons, and teaspoons measure volume, while grams and ounces by weight measure mass. That distinction matters because a cup of flour does not weigh the same as a cup of sugar, butter, or rice. A universal “cups to grams” answer is therefore only possible when the ingredient is specified.

The chart below uses common U.S. volume measures. Milliliter values are rounded for kitchen use, and the gram column is not included because grams depend on ingredient density. For baking, a digital scale is generally the most consistent way to measure flour, cocoa, sugar, nuts, and other dry ingredients.

Volume measureEquivalentApproximate metric volume
1 teaspoon1 tsp5 mL
1 tablespoon3 teaspoons15 mL
1 fluid ounce2 tablespoons30 mL
1/4 cup4 tablespoons60 mL
1/3 cup5 tablespoons plus 1 teaspoon80 mL
1/2 cup8 tablespoons120 mL
2/3 cup10 tablespoons plus 2 teaspoons160 mL
3/4 cup12 tablespoons180 mL
1 cup16 tablespoons or 48 teaspoonsabout 237 mL

How many tablespoons are in a cup? There are 16 level tablespoons in 1 U.S. cup. Because 1 tablespoon equals 3 teaspoons, 1 cup also equals 48 teaspoons. These relationships are useful when you do not have a particular measuring cup, but they do not replace weighing ingredients when precision matters.

Common ingredient weight references

Use these as practical starting points, not universal standards. Packing, sifting, humidity, grain size, and the way an ingredient is measured can change the result.

Ingredient1 cup, approximate weightMeasurement note
All-purpose flour120 to 125 gSpoon into a cup and level, rather than scooping directly from the bag.
Granulated sugarabout 200 gUsually fills a dry measuring cup evenly without compression.
Butterabout 227 gUse marked sticks or weigh it; softened butter should not be packed into a cup.
Uncooked white riceabout 185 to 195 gWeight varies by rice variety and grain shape.
Waterabout 237 gFor water and similar liquids, milliliters and grams are numerically close.
Milkabout 240 gDensity is slightly different from water, so treat this as an approximation.

Liquid measures and dry measures are not interchangeable simply because both may be described as a “cup.” A liquid measuring jug is designed to be read at eye level, while dry cups are filled and leveled. For the most repeatable baking results, weigh dry ingredients and use a volume measure for liquids when the recipe is written that way.

Checklist by scenario

When converting volume to grams

  1. Identify the ingredient. Find a tested weight reference for that specific ingredient rather than applying water’s conversion to flour or sugar.
  2. Check the form. “1 cup flour,” “1 cup sifted flour,” and “1 cup packed brown sugar” describe different measurements.
  3. Choose a reference value. For example, if your recipe uses 2 cups of all-purpose flour and your reference is 125 g per cup, use 250 g.
  4. Round sensibly. Round to the nearest whole gram for most baking ingredients. Avoid excessive decimal places that suggest greater precision than the original recipe supports.
  5. Record the result. Write the converted weight beside the ingredient so you can reproduce the recipe later.

Basic formula: ingredient weight = volume amount × grams per cup. If a recipe calls for 3/4 cup of sugar and your reference is 200 g per cup, calculate 0.75 × 200 = 150 g.

When scaling a recipe up or down

  1. Write the original and target servings. Do not rely on memory or adjust ingredients one at a time.
  2. Calculate the scaling factor. Divide target servings by original servings. A recipe for 4 that must serve 6 has a factor of 6 ÷ 4 = 1.5.
  3. Multiply every ingredient. Apply the same factor to flour, liquid, fat, salt, sugar, spices, and additions.
  4. Convert awkward amounts. Turn decimals into familiar measures where practical. For example, 1.5 tablespoons equals 1 tablespoon plus 1 1/2 teaspoons.
  5. Review the method. A larger batch may need a wider pan, multiple trays, more mixing space, or additional cooking time. Do not automatically double the cooking time.

Basic formula: new amount = original amount × target servings ÷ original servings. A recipe scaler can do the arithmetic, but you still need to check pan size, ingredient form, and the cooking method.

When converting a whole recipe from volume to weight

  1. List each ingredient separately.
  2. Convert dry ingredients using ingredient-specific references.
  3. Keep small quantities such as 1/4 teaspoon of spice in volume form unless you have a reliable weight reference and a sufficiently precise scale.
  4. Leave eggs as a count when the scaled amount is whole. For partial eggs, beat the egg, weigh it, and use the required fraction.
  5. Keep liquids in milliliters or grams only after confirming which unit the recipe uses.
  6. Review the converted recipe from top to bottom before mixing.

For related ingredient guidance, see our guide to cooking rice and its water ratios or the cooking oil guide when a recipe gives oil by volume.

What to double-check

  • U.S. versus metric cups: A U.S. cup is approximately 237 mL, while a metric cup is commonly 250 mL. Check the recipe’s origin before converting.
  • Fluid ounces versus ounces by weight: Fluid ounces measure volume. Ounces on a kitchen scale measure weight. They are not automatically equivalent.
  • Level versus packed: Flour, cocoa, and powdered sugar are usually leveled; brown sugar is often packed when the recipe specifies it.
  • Sifted versus unsifted: Sifting changes how much ingredient fits into a cup. Follow the recipe’s wording in the stated order.
  • Ingredient state: Chopped nuts, grated cheese, melted butter, and solid butter can have different volume-to-weight relationships.
  • Scale capacity and accuracy: Confirm that your scale can handle the bowl and the full quantity. Tare the bowl before adding ingredients.
  • Small amounts: A scale may be unreliable for very small quantities. Measuring spoons are often more practical for yeast, salt, baking soda, and spices.

If the conversion affects a yeast-based dough, remember that flour absorption and dough texture are also influenced by how the flour was measured. Add a small portion of the liquid gradually if the dough seems unusually stiff or loose, while keeping the recipe’s intended hydration in mind.

Common mistakes

Using one grams-per-cup number for every ingredient

This is the most common conversion error. A cup of flour, sugar, and rice occupies the same volume but has a different mass. Use an ingredient-specific reference and note whether the ingredient is sifted, chopped, packed, melted, or otherwise prepared.

Confusing a measuring cup with a coffee cup

A household mug is not a dependable measuring tool. Use standard measuring cups and spoons, or weigh the ingredient.

Scaling only the main ingredients

When resizing a recipe, it is easy to multiply flour and liquid while forgetting salt, leaveners, spices, or garnish. Apply the factor to the complete ingredient list, then review ingredients that are difficult to divide, such as eggs and packaged yeast.

Changing the pan without checking depth

A doubled cake batter placed in the original pan may become too deep and bake unevenly. Choose a pan with enough capacity or divide the batter between pans. The same principle applies to casseroles and sheet-pan recipes.

Assuming metric conversions make a recipe exact

Grams improve consistency, but they cannot correct an unclear original recipe or an inaccurate ingredient reference. Treat conversions as a tested working estimate and adjust only after observing the result.

When to revisit

Return to this kitchen measurement conversion chart whenever a recipe uses unfamiliar units, you change the serving size, or you move between volume and weight. It is especially useful before holiday baking, batch cooking, and seasonal meal planning, when recipes are often multiplied or combined into a larger menu.

Review a saved conversion when you switch brands or forms of an ingredient, such as whole-grain flour for all-purpose flour, a different rice variety, or grated cheese in place of a block. The volume may look similar while the weight and cooking behavior differ.

Before you start, use this final checklist:

  1. Confirm whether the recipe uses U.S. or metric measures.
  2. Separate fluid ounces from ounces by weight.
  3. Identify the ingredient form and whether it is packed, sifted, chopped, or melted.
  4. Choose a specific grams-per-cup reference for each dry ingredient.
  5. Calculate the scaling factor before changing any amounts.
  6. Check eggs, yeast, leaveners, pan capacity, and cooking time separately.
  7. Write down your final conversions for the next time you make the recipe.

Keep the chart near your scale or save it with your favorite baking references. A few seconds spent checking the unit, ingredient, and scaling factor can prevent an entire batch from being thrown off.

Related Topics

#cooking conversions#baking basics#kitchen measurements#recipe scaling#printable charts
M

MasterChef Pro Editorial Team

Food and Kitchen Editor

Senior editor and content strategist. Writing about technology, design, and the future of digital media. Follow along for deep dives into the industry's moving parts.